Servicing your car regularly can help reduce future costly repairs, but
it's not necessary to have a full service every time. We have a range of
car service options to suit both you and your car - everything
from the sort of check-up that keeps things running smoothly to
a comprehensive service that will put your mind at rest before, say,
a major trip.

All with the thoroughness, technical knowledge and work quality for
which are our areas of expertise.

Nitrogen will run cooler than normal compressed air, will exhibit slower leakage, have no oxidation, and be virtually non combustible.

In particular circumstances, pure Nitrogen is used as the inflation medium in earthmover, racing, and aviation tyres to where they are required to perform under conditions of high stress and in critical environments, generating higher than usual temperatures. Examples are:

  • Where exceptionally high loads are carried by the vehicle,
  • High-speed travel,
  • Where high pressure must be maintained.

Also, in some instances, the tyre casing wears better, and to some extent, tyre tread wears more slowly, when Nitrogen is used in these extreme circumstances.
Annual inspection coming up soon? We can provide a pre-inspection services to make sure your car is in compliance with LTA regulations.

Tyre rotation is vital to achieving even tread wear and long tread life. Rotation is necessary because of the uneven wear characteristics of each wheel position on the vehicle. A good example is Front Wheel Drive vehicles which places braking, steering and driving forces on the front axle tyres. Rear axle tyres only receive braking forces resulting in a much faster wear rate for the front axle tyres. Tyre rotation for these vehicles therefore becomes very important for optimum tyre life.

Tyre rotation should be undertaken every 5,000 to 8,000 kilometres:
EVEN IF THERE IS NO SIGN OF UNEVEN WEAR
Using only the best, Hunter Wheel Alignment system,alignment is done by adjusting the angles of the wheels so that they are perpendicular to the ground and parallel to each other. The purpose of these adjustments is maximum tire life and a vehicle that tracks straight and true when driving along a straight and level road.